Product finder

Select your machine

Brands

Owned by Zuse Automation

Powered by Zuse Automation

Maschines

Owned by Zuse Automation

Powered by Zuse Automation

Service
Company
Contact
Lang: EN
DE
EN
CN
RU

KOVOSVIT MAS PRODUCT PORTFOLIO

MCV 1000 5X

Robust 3-axis machine tool with mounted swivel rotary table for full 5-axis simultaneous machining.

  • Linear roller guides
  • Highly dynamic and high-performing milling spindle with up to 623 Nm and torque at 40% duty
  • Swivel rotary table for 5-axis simultaneous machining
  • 24 months guarantee as standard

MCU 700 V 5X

5-axis universal machining center for complex work pieces with torque rotary table driven by both sides that guarantees top work piece quality.

  • Linear roller guides
  • Highly dynamic and high-performing milling spindle with up to 623 Nm and torque at 40% duty
  • NC rotary and swivel table with torque drives for 5-axis simultaneous machining
  • 24 months guarantee as standard

MCU 1100 V 5X

5-axis universal machining center for complex work pieces with torque rotary table driven by both sides that guarantees top work piece quality.

  • Linear roller guides
  • Highly dynamic and high-performing milling spindle with up to 623 Nm and torque at 40% duty
  • NC rotary and swivel table with torque drives for 5-axis simultaneous machining
  • 24 months guarantee as standard

MCU 700VT 5X

5-axis mill-turn machining center with rotary table for milling and turning of complex work pieces in only one set up.

  • Linear roller guides
  • Highly dynamic and high-performing milling spindle with up to 623 Nm and torque at 40% duty
  • NC rotary and swivel table with torque drives for 5-axis simultaneous machining
  • 24 months guarantee as standard
  • High-performing rotary table with 500 rpm

MCU 1100 VT 5X

5-axis mill-turn machining center with rotary table for milling and turning of complex work pieces in only one set up.

  • Linear roller guides
  • Highly dynamic and high-performing milling spindle with up to 623 Nm and torque at 40% duty
  • NC rotary and swivel table with torque drives for 5-axis simultaneous machining
  • 24 months guarantee as standard
  • High-performing rotary table with 500 rpm

MULTICUT 500i

Turn-mill complete machining center for 6-side complete machining with high-performance milling spindle with 100 Nm at 40% duty.

  • Powerful milling spindle with 12 000 rpm and 100 Nm torque at 40% duty
  • 50 m/min rapid traverse in X/Y/Z
  • Highly ergonomic and optimized accessability
  • Tool magazine with 81 tool pockets
  • Direct travel measurement system (optical)
  • 24 months guarantee as standard

MULTICUT 630

Turn-mill complete machining center for 6-side complete machining with highest flexibility for components of up to 6100 mm length.

  • Powerful milling spindle with 12 000 rpm and 255 Nm torque at 40% duty
  • 50 m/min rapid traverse in X/Y/Z
  • Highly ergonomic and optimized accessability
  • Tool magazine with 81 tool pockets
  • Direct travel measurement system (optical)
  • 24 months guarantee as standard

MCV 754 BASELINE

Vertical machining centers for entry into CNC machining with compact machine design for optimal performance.

  • Linear roller guides
  • Powerful milling spindle with 13 kW and 83 Nm at 40% duty
  • Travels X / Y / Z: 754 / 500 / 550
  • HEIDENHAIN TNC 620 process control
  • 24 tool pockets and 30 m/min rapid traverse
  • 24 months guarantee as standard

MCV 754 QUICK

Standard vertical machining centers with compact machine design for optimal performance.

  • Linear roller guides
  • Powerful milling spindle with 13 kW and 83 Nm at 40% duty
  • Travels X / Y / Z: 754 / 500 / 550
  • Direct travel measurement system in all axes
  • 24 tool pockets and 30 m/min rapid traverse
  • 24 months guarantee as standard

MCV 1016 QUICK

Standard vertical machining centers with compact machine design for optimal performance.

  • Linear roller guides
  • Powerful milling spindle with 25 kW and 239 Nm at 40% duty
  • Travels X / Y / Z: 1060 / 610 / 710
  • Direct travel measurement system in all axes
  • 24 tool pockets and 30 m/min rapid traverse
  • 24 months guarantee as standard

MCV 1016 BASELINE

Vertical machining centers for entry into CNC machining with compact machine design for optimal performance.

  • Linear roller guides
  • Powerful milling spindle with 14 kW and 90 Nm at 40% duty
  • Travels X / Y / Z: 1060 / 610 / 710
  • 24 tool pockets and 30 m/min rapid traverse
  • 24 months guarantee as standard

MCV 750

Powerful vertical machining center for top requirements in high precision machining.

  • Linear roller guides
  • Highly dynamic and high-performing milling spindle with up to 200 Nm and torque at 40% duty
  • Travels X / Y / Z: 750 / 500 / 500
  • Direct travel measurement system in all axes
  • 24 tool pockets and 40 m/min rapid traverse
  • 24 months guarantee as standard

MCV 1000

Powerful vertical machining center for top requirements in high precision machining.

  • Linear roller guides
  • Highly dynamic and high-performing milling spindle with up to 623 Nm and torque at 40% duty
  • Travels X / Y / Z: 1016 / 610 / 720
  • Direct travel measurement system in all axes
  • 30 tool pockets and 40 m/min rapid traverse
  • 24 months guarantee as standard

MCV 1270

Powerful vertical machining center for top requirements in high precision machining.

  • Linear roller guides
  • Highly dynamic and high-performing milling spindle with up to 623 Nm and torque at 40% duty
  • Travels X / Y / Z: 1270 / 610 / 720
  • Direct travel measurement system in all axes
  • 30 tool pockets and 40 m/min rapid traverse
  • 24 months guarantee as standard

MMC 1500

Portal machining center for component sizes of up to 1500 x 1300 mm, or available in double-table design.

  • Linear roller guides
  • Highly dynamic and high-performing milling spindle with up to 579 Nm and torque at 40% duty
  • Travels X / Y / Z: 1500 / 1300 / 600
  • Direct travel measurement system in all axes
  • 60 tool pockets and 45 m/min rapid traverse
  • 24 months guarantee as standard

SP 280

Powerful universal turning center for hard turning up to 250 chuck size and spindle diameter of Ø 61 mm.

  • Direct drive motor spindle
  • Turret with 12 driven tool stations
  • VDI 40
  • Y-axis with +50/-50 mm travel (option)
  • Counter spindle optionally available
  • 24 months guarantee as standard

SP 430

Powerful universal turning center for component sizes of up to ø 630 x 2500 mm.

  • Direct drive motor spindle
  • Turret with 12 driven tool stations
  • VDI 50
  • Y-axis with +100/-80 mm travel (option)
  • Counter spindle optionally available
  • 24 months guarantee as standard

SPH 50

Production turning centers with two turrets for parallel application of two tools.

  • Machining technology for long and heavy shafts
  • Version SPH 50 D: precise machining of complex geometries with wave character
  • Version SPH 50 DS: Machine with additional counter spindle

MASTURN 550i

Cycle lathes with CNC control for production for batch and small-series.

  • Ergonomic design with double door for optimal accessibility
  • Internal coolant supply with 8 bar
  • Guideways for top performance requirements
  • Automatically controlled (hydraulic) tailstock as standard
  • Best drive technology with 2-step gear and 1.875 Nm torque at 40% duty
  • Turret with 8 pockets (option)
  • 24 months guarantee as standard

MASTURN 820i

Cycle lathes with CNC control for production for batch and small-series.

  • Ergonomic design with double door for optimal accessibility
  • Internal coolant supply with 8 bar
  • Guideways for top performance requirements
  • Automatically controlled (hydraulic) tailstock as standard
  • Best drive technology with 2-step gear and 1.875 Nm torque at 40% duty
  • Turret with 8 pockets (option)
  • 24 months guarantee as standard

ROLLER 2800 CNC

Special technology for deep rolling shaft components as applied in the railway industry.

  • Cold moulding technology (compaction of material)
  • Rolling of cylindrical, conical and transition radius areas of shaft parts
  • Specialized production of parts using surface rolling technology
  • The form rolling equipment is located on the longitudinal saddle
  • The saddle moves by means of CNC controlled axis Z on the bed of the machine

KOVOSVIT MAS MACHINE TOOLS

Your strong partner for robust, technically refined machining of larger work pieces – made in Europe.

KOVOSVIT MAS has more than 75 years of experience in the development of machine tools. As a leading European industry partner in our immediate neighborhood, the Czech Republic, MAS machine tools convince by maximum stability, precision, and smooth operation. MAS develops high-performing solutions for all industries.

DISCOVER OUR OTHER PARTNERS

Send us a message:

* Fields marked with (*) are mandatory.
Title
Mr Ms
Please check first name
Please check last name
Please check company
Please check email address
Please check message
XXXX !!!!

I have read and accepted the data privacy protection statement

Sending of your message has failed. Please read and check off the data privacy protection statement. Thank you!
Thank you for your interest in Zuse Automation. We will get back to you shortly.
We thank you for your interest in the Zuse Automation newsletter and all topics concerning manufacturing of tomorrow! Soon, you will receive an email with a confirmation link. Please click on the link to confirm subscription, after that, you will receive our newsletter. If you want to stop receiving our newsletter you can cancel subscription at any time via a link in each newsletter.
Unfortunately, your data can’t be submitted because this email already exists in our system!